Deck & Porch Products


 Pressure treated yellow pine 

  •  Standard lengths, 12′ and 16′
  • Standard size, 5/4 x 6 (1-1/16″ x 5-1/2″)
  • Kiln dried twice, once before treating, and a second time after treating
    o Less shrinkage
    o Less warping
    o Less twisting
    o Less splitting
  • Can be stained or painted immediatel

  • Western Red Cedar
  • Stocked D & Better grade (essentially clear material),
  • D & Better grade 5/4 comes in random lengths from 6′ to 16′
  • Very light in weight
  • Dimensionally stable
  • Naturally insect, weather, and rot resistant
  • Will accept paint or stain very readily


  • Composite Decking


  • Man made decking
  • Minimal maintenance
  • Installs the same as pressure treated
  • Typically requires framing no wider than 16″ on center
  • Stock lengths typically 12′, 16′ and 20′
  • Accessory trim material vary with manufacturer
  • Does not require any further finishing-stain or paint
  • ModernView Decking
    o Composite of high and low density polyethylene and encapsulated wood fiber
    o Can be used in contact with ground or in water
    o Rough wood grain texture on one side
    o Four (4) colors available: Slate, Auburn, Java and Amber
    o 1×12 fascia trim boards available, 12′ lengths
    o Available with grooved edge for hidden fastener use
  • Azek Decking
    o Cellular PVC decking
    o Embossed wood grain texture
    o Fifteen (15) colors available: Brownstone, Slate Gray, Kona,  Sedona, Tahoe, Silver Oak, Morado, Redland Rose, Acacia, Hazelwood.  XLM Harvest Bronze, XLM Rustic Bark, XLM Walnut Grove, XLM River Rock, XLM Sandridge
    o 1/2 x 8, and 1/2 x 12 trim boards are available, 12′ lengths
    o Stain and wear Resistant
    o Color matched hand rails available for some deck colors


Porches and decks require railings. You can design and build your own or take advantage of pre-made kits.  Matthews & Fields can also build primed and clear wood cedar railing sections

Trademark Railing, a composite material

Colorguard Railing, a vinyl material

Porch Flooring & Ceiling Material

We stock wood to match historic porches for repairs and new porches. Douglas fir ceiling material can be used on a porch ceiling or inside on a wall. Douglas fir and mahogany tongue & groove boards are stocked.

Douglas Fir Flooring

  • Stocked in 1 x 4 and 5/4 x 4 sizes in Douglas Fir flooring
  • Beaded ceiling stocked in 5/8 x 4
  • The Douglas Fir is Quarter sawn, clear vertical grain material, the most stable cut of the wood
  • Porch flooring is sold in sold in random lengths from 4′ to 16′, odds and evens
  • Dimensionally stable
  • Can be stained or painted

PVC Flooring

Mahogany Flooring

  • Stocked in 1 x 4
  • Deep red color
  • Sold in random lengths from 4′ to 16′, odds and evens
  • Harder than Douglas Fir
  • Can be stained or painted
  • Dimensionally stable

Porch Ceiling

  • Quarter sawn Douglas Fir, clear vertical grain material, the most stable cut of the wood
  • Sold in random lengths from 4′ to 16′, odds and evens
  • 5/8″ x 4, tongue and groove
  • Dimensionally stable
  • Can be stained or painted
  • Edge and center bead
  • Can also be used as wainscoting

Thermory Decking

  • Function, beauty, and unmatched stability
  • Plain sawn with beautiful cathedral grain
  • Conventional installation, Thermory® is incredibly flat, stable, and installed by face screwing or pre-grooved for hidden clip fastening systems
  • Matching railings, siding and fence components available
  • Class 1 durability rating, resistant to rot and decay for 25+ years
  • Harvested from sustainable American forests, not rain forests!
  • Half the weight of Ipe
  • Easy on tooling, saw blades and drill bits
  • Less thermal conductivity than Ipe or composites, no hot feet!
  • Dust is not toxic
  • Green thermal process using only heat and steam, no chemicals
  • Proven experience and established manufacturing using European technology
  • Ages gorgeously to a silver color, matching coastal homes or maintain tropical tones with UV deck oils
  • Thermory® USA has a fully functional manufacturing facility with planners, sanders, jointers, saws, CNC capabilities, molder, etc… so always ask, “Can we do this?”